Product photos are for reference. Confirm the final configuration in your quotation.
Model: HT-WTQD-015RT
This 1,500 kg electric pallet truck combines powered travel, hydraulic lifting and a stand-on operator platform. Large front wheels and wide support legs define its handling layout. Match the truck to your pallet dimensions, ground conditions and working route before selecting the configuration for your site.
1.500 kg
Nominale capaciteit
48V
Electrical System
200 mm
Listed Fork Lift Height
Stand-On
Type operator
CONFIGURATIE & PRIJS
Review the load, pallet and travel route together. Ground conditions, support-leg clearance and battery requirements are key details for selecting and quoting this configuration.
01 / ELECTRIC DRIVE & LIFT
The 48V system uses a 1.5 kW drive motor and a 2.2 kW hydraulic pump motor. Stand-on operation and electronic braking are included in the listed configuration. The truck is intended for pallet movement and low-level lifting rather than high-rack stacking.
02 / PALLET & SUPPORT LEGS
The listed forks measure 1,070 × 100 mm. Support-leg inside and outside widths are 1,300 and 1,540 mm respectively. Send the pallet dimensions, entry arrangement and route clearances so both fork fit and support-leg clearance can be reviewed.
03 / GROUND & WORK CYCLE
Share photos of the ground, thresholds, slopes and turning areas, together with the intended load. Battery capacity is selected to order. Include working hours and charging arrangements so the proposed configuration can be assessed for your operation.
SPECIFICATIES
Reference specification for the pictured stand-on configuration. Confirm the final truck and site requirements before ordering.
| Rated load capacity | 1.500 kg |
|---|---|
| Operator type | Stand-on |
| Travel and lifting | Elektrisch |
| Base truck weight | 400 kg |
| Fork dimensions, L × W | 1,070 × 100 mm |
| Listed fork lift height | 200 mm |
| Support-leg inside width | 1.300 mm |
| Support-leg outside width | 1,540 mm |
| Braking | Electronic brake |
| Electrical system | 48V |
| Drive motor power | 1.5 kW |
| Hydraulic pump motor power | 2.2 kW |
| Battery capacity | Selected to order |
Support-leg widths are not fork-spacing measurements. The listed fork lift height is not chassis ground clearance. Surface suitability, gradients and final battery configuration require a separate check.
Tell us your load, pallet dimensions, operating route and daily workload, plus quantity and delivery destination. Confirm any configuration choices shown for your model and include relevant battery, weighing or terrain requirements.
Deze website wordt beveiligd door reCAPTCHA en Google Privacybeleid en Gebruiksvoorwaarden van toepassing zijn.
Uw contactgegevens helpen ons om op uw vraag te reageren.
KLANTSERVICE & VEELGESTELDE VRAGEN
Ask about parts identification, operating information and the support terms for your order.
Provide the equipment label, order details and photos of the wheel, brake, drive or hydraulic component involved. Include the selected battery specification for electrical enquiries.
Confirm the warranty period, operating-condition requirements, exclusions and parts-support arrangements in writing before ordering.
Neem contact op met ons team voor uitgebreide ondersteuning.
Neem contact met ons opSuitability is not guaranteed by the product name. Send ground photos, surface details and the intended load so the selected configuration can be assessed. Soft ground and loose surfaces require particular attention.
These are the inside and outside widths of the support legs. They do not describe fork spacing, and additional space may be needed for steering and manoeuvring.
No. The figure refers to the listed fork lift height. Chassis ground clearance is a separate measurement and should be requested when reviewing thresholds or uneven ground.
This is a low-lift pallet-handling configuration, not a high-lift stacker. The listed 200 mm fork lift height should not be treated as truck-bed loading or rack-stacking capability.
The electrical system is 48V, while battery capacity is selected to order. Specify working hours, travel distance and charging arrangements to establish the battery and charger configuration.
A verified gradeability limit is not stated for this configuration here. Provide the slope, surface condition, load and route details, and request model-specific operating limits before use.
